Close   
dHH
dHH Explosion-proof signal horn
This product has the following explosion protection:
II 2 G Ex d e IIC T5, T6 Gb
II 2 D Ex tb IIIC T95 °C, T80 °C Db
-20 °C ≤ Ta ≤ +75 °C T5
-20 °C ≤ Ta ≤ +70 °C T6
Zone 1, 2, 21, 22
Request product
Download 3D model

dHH Explosion-proof signal horn

  • Loud, explosion-proof electromechanical signal horn with a typical horn tone
  • Certified for use in gas and dust hazardous areas of zone 1, 2, 21, 22
  • Flame-proof enclosure "d"
  • Terminal connection chamber "increased safety e"
  • Housing made of glass-fibre-reinforced plastic
  • Degree of protection IP 66, max. 105 dB (A) in 1 m
  • Protection class II, no equipotential bonding required
  • robust design
  • Model with integrated telephone-call current relay available

Especially suitable for

Technical data

HousingØ 190 mm, glass-fibre-reinforced polyester
Type of mountinghorizontal, vertical or any, sound outlet preferably at front or bottom
Cable entry1x cable gland M20 x 1.5, 1x sealing plug M20 x 1.5
Connection technology1.5 mm² fine wire and 2.5 mm² single wire
ToneSteady tone
Volumemax. 105 dB
Duty cycle100 %
Operating temperature-20 °C / +75 °C (T5) -50 °C / +70 °C (T6)
Degree of protectionIP66
ApprovalPTB 01 ATEX 1133
Insulation classII
Weight5,5 kg
You can change your settings and withdraw your consent at any time. The lawfulness of the processing carried out on the basis of the consent up to the revocation is not affected by this.