Close   
ASL+QDL
ASL+QDL Multi-tone alarm sounder and LED steady/flashing beacon

Visual equipment

Request product
Download 3D model

ASL+QDL Multi-tone alarm sounder and LED steady/flashing beacon

  • Combination of 184 mm cubic-design multi-tone alarm sounder and LED steady/flashing beacon
  • Beacon with very good frontal/lateral signalling effect
  • High degree of protection IP 66
  • UV-stabilised material
  • 63 tones can be selected, 3 tones can be switched externally
  • Max. 120 dB (A) sound pressure, infinitely adjustable
  • Types of light can be switched externally
  • For industrial and general applications

Technical data – visual equipment

Housing184 mm (square), Polycarbonate, UV stabilized
LensPolycarbonate, ribbed inside amber, red, clear, blue, green or yellow
Type of mountinghorizontal, vertical or any
Cable entryBack: Grommet 5–10 mm, optional side cable entry with cable gland (on both sides) (accessory type AKV)
Connection technologyScrew/plug-in terminal 2,5 mm²
Leakage current0,003 A
Beacon typeLED steady beacon or LED flashing beacon
Light source6 High Power LEDs
Luminous intensity170 Cd
Strobe/flash frequency2 Hz
Duty cycle100 %
Service lifeLight source: >50.000 h
Operating temperature-30 °C / +60 °C
Degree of protectionIP66 & UL Type 4/4x/13
Impact resistanceIK09
Weight1,5 kg

Technical data – audible equipment

HousingPolycarbonate, UV stabilized
Type of mountinghorizontal, vertical or any, Sound outlet opening at bottom or horizontal
Cable entryBack: Grommet 5–10 mm Side: AKV cable gland M20 x 1.5 7–14 mm can be mounted
Connection technologyScrew/plug-in terminal up to 2,5 mm²
Leakage current0,003 A
Tone63 Tones, 3 Tones can be switched externally, see tone table
Volume120 dB (can be adjusted with potentiometer)
Tone frequency150-3.100 Hz
Duty cycle100 %
Operating temperature-30 °C / +60 °C
Degree of protectionIP66
Impact resistanceIK09
Weight2,2 kg

Visual equipment

TypeLens colourNominal voltageVoltage range (V)Nominal current (A)Part no.
QDLamber24-48 V AC/DC18-53 V AC
18-60 V DC
0,780 874361408Save to watchlist
QDLamber110-240 V AC/DC80-2650,210 874361413Save to watchlist
QDLblue24-48 V AC/DC18-53 V AC
18-60 V DC
0,780 874365408Save to watchlist
QDLblue110-240 V AC/DC80-2650,210 874365413Save to watchlist
QDLclear24-48 V AC/DC18-53 V AC
18-60 V DC
0,780 874364408Save to watchlist
QDLclear110-240 V AC/DC80-2650,210 874364413Save to watchlist
QDLgreen24-48 V AC/DC18-53 V AC
18-60 V DC
0,780 874366408Save to watchlist
QDLgreen110-240 V AC/DC80-2650,210 874366413Save to watchlist
QDLred24-48 V AC/DC18-53 V AC
18-60 V DC
0,780 874362408Save to watchlist
QDLred110-240 V AC/DC80-2650,210 874362413Save to watchlist
QDLyellow24-48 V AC/DC18-53 V AC
18-60 V DC
0,780 874367408Save to watchlist
QDLyellow110-240 V AC/DC80-2650,210 874367413Save to watchlist

Audible equipment

TypeNominal voltageVoltage range (V)Nominal current (A)Mains frequencyPart no.
ASL24-48 V AC/DC21-53 V AC
21-60 V DC
1,200
0,900
50-60 Hz874360408Save to watchlist
ASL110-120 V AC+/- 10 %0,200 50-60 Hz874360310Save to watchlist
ASL230-240 V AC+/- 10 %0,100 50-60 Hz874360313Save to watchlist

Accessories

TypeType of accessoryWeightPart no.
Adjustment pin for built-in buzzer  - PINPINAdjustment pin for built-in buzzer 1 g813909405Save to watchlist
Mounting set for combining several pieces of signalling equipment of the same size - AMKAMKMounting set for combining several pieces of signalling equipment of the same size10 g874010900Save to watchlist
Flat seal for correct IP66 installation on smooth surfaces - AG3AG3Flat seal for correct IP66 installation on smooth surfaces67 g874023900Save to watchlist
Cable gland M20x1,5 - AKVAKVCable gland M20x1,514 g698800026Save to watchlist
You can change your settings and withdraw your consent at any time. The lawfulness of the processing carried out on the basis of the consent up to the revocation is not affected by this.